instaling Business Card Designer 5.15 + Pro

There is a GeForce RTX3080Ti in the 'main' PCIexpress slotĪnd NO other PCIexpress extension card aside from the one with the NVMEs installed on it. On the motherboard on the dedicated port there is a 1TB NVME, let's call it NVME0 Hardware Setup Plugged on the motherboard > the result is always the same, only one NVME is seenĪll the above attempts have been checked on both Windows 10 Pro and Linux (Linux Mint 5.15.0-82-generic) In the BIOS I tried the PCIe express configuration from Auto to 4x4, etc. There were two of them: a WiFi card and a USB3 extension card -> removing them did not improve the detection of the additional NVME I removed ALL other PCIexpress extension cards. I tried all possible permutations of NVME1 and NVME2 on the extension card -> only the nvme plugged on port1 is visible/recognized by the computer It does not matter whether a NVME is plugged on port 2,3 or 4 -> as long as there's something on port1, only stuff on port1 will be seen. In other other words, any NVME plugged anywhere else than on port1 of the extension card will not be seen/recognized by the computer.įor information there are 4 ports on the PCIe extension card -> I tried ALL permutations of ports and NVME -> None of them work, except when any NVME is plugged on Port1 -> then it'll be seen by the computer.

Or I can ONLY see NVME2 when it's plugged on port1 of the PCIe extension cardīelow I try to clarify the issue, but it might just be confusing :') I can ONLY see NVME1 when it's plugged on port1 of the PCIe extension card I can NEVER see BOTH NVME1 and NVME2 working at the same time. I bought two NVME of 4TB each that I plugged on a PCIexpress extension card on my motherboard.

Instaling Business Card Designer 5.15 + Pro